Skip to main content

Summer Training Report For Thermal Power Plant- FIRE & SAFETY

FIRE & SAFETY


          Sources of Fire
The main source of fire in any industry are electricity, smoking, friction, over heating material, hot surfaces, burner flame ignition cutting ad welding, mechanical spark, static spark and other sources asa exposure, the extent to which the industrial fire is caused by this sources which has been shown as under:
                                      Electricity                              32%
                                      Smoking                                 09%
                                      Friction                                  10%
                                      Hot surfaces                           15%
                                      Burner Flame                         06%
                                      Spontaneous Ignition           05%
                                      Cutting and welding             09%
                                      Mechanical Spark                 02%
                                      Static Spark                           02%
                                      Others                                     10%
                                      Total                                       100%


Cause of Fire
1.                Cutting &  welding
2.                Heat/ over heat
3.                Elec. Arc/Spark, Elec. Short circuit
4.                Metal Spark
5.                Loco Spark
6.                Mechanical Fault
7.                Spontaneous Combustion
8.                Static Electricity
9.                Improper Quenching
10.           Friction
11.           Open Flame
12.           Not Known
13.           Miscellaneous and others

Important fire haards in thermal power station

1.                Boiler
a)    Accumulation  of coal dust
b)   Air pre hearts
c)    Fuel oil
d)   Rejected coal from coal mills


2.                Turbine
a)    Oil leakages from bearings
b)   Oil leakages from Sealings
c)    Oil leakages from Governing system
d)   Oil leakages from jacking system Etc.

3.                Generator
a)    Leakage of
b)   Exciter sliperings


4.                Oil Facility
a)    Fuel oil in tanks
b)   Oil splashes mear oil transfer pump & motors
c)    Oil splashes in tunnels


5.                Coal handling plant
a)    Spontaneous fire in coal heaps
b)   Coal dust
c)    Conveyor belts
d)   Mobable equipments


6.                Hydrogen plant
a)    Electric Equipments


7.                Switch yard
a)    Transformers
b)   Breakers
c)    CT/PT

8.                Transformers/Breakers/Cables
a)    Generator transformers
b)   Unit aux transformers
c)    Switch gear rooms
d)   Cable galleries





















FIRE PROTECTION
To reduce to loss of fire is FIRE PROTECTION.
Fire Protection is a planned approach to the provision of adequate structural safe guard against the possibility of fire speard and the availability of fixed and portable appliances which will readily available in emergency.
The protection is done by various type of system.

FIRE PROTECTION SYSTEM:-
System which are used to reduce the loss of fire is
FIRE PROTECTION system.
There are two types of Fire Protection System
1.    Active System.
2.    Passive System.


ACTIVE FIRE PROTECTION SYSTEM
As their name indicte that the systems which are operated automatically in case of fire ate Active Fire Protection system
1.    Sprinkler System
2.    Mulsifyre System
3.    CO2 injection System




4.    Smoke Detection System clubbed with total flooding system of any extinguishing agent.
5.    Automatic Modulars.
6.    fire resisting Coating for H.T. Cables.

PASSIVE FIRE PROTECTION SYSTEM
The systems which are operated manually in case of fire to reduce fire loss are PASSIVE FIRE PROTECTION SYSTEM.
1.    Smoke Detection System.
2.    Heat Detectors.
3.    Booster Pump System.
4.    Landing Valves.
5.    Hydrant System.
6.    Dry Riser System.
7.    Foam Pourers.
8.    Hydrant Ring main
9.    Deluge System.
10.     First Aid Fire Fighting Equipment.
11.     Static Tank Water Spray System.



Comments

Popular posts from this blog

HIGH VOLTAGE TEST TECHNIQUES - Research Paper

Abstract: In this paper we have dealt with the high voltages testing techniques and High voltage measurement techniques.Different techniques like Chubb-Fortescue Method and Peak value measurement are also explained in detail. The method of measurement of voltage with the help of Sphere Gap and Construction of Sphere Gap and its Effects of earthed objects and atmospheric conditions on the accuracy of measurement are explained in details.Other techniques like Principle of measurement of voltage by Electrostatic Voltmeters and its Construction of Electrostatic Voltmetres help in study of High Voltages. Principle of Potential Dividers And types of potential dividers circuit are also covered in this paper. High test voltages generated in laboratories require special techniques for their measurement. Each type of high voltage namely; ac (), dc (=) and impulse () can be suitably measured with more than one different techniques. The choice of the method of measurement in a laboratory is ...