Skip to main content

Load Forecasting and its Importance in Power System - Research Paper

Abstract- Load forecasting is the most important factor for any electric industry in the deregulated economy structure. It has wide range of applications namely as energy purchasing and generation, load switching, contract evaluation, and infrastructure development. Numerous techniques are being used to get an accurate forecasting. In this paper we are going to analyse some of them. We have tried to understand the impact of load forecasting on the power system and its limitations.
Keywords- Load, forecasting, statistics, power system, artificial intelligence

                                                                                                                                                           I. Introduction

For any utility company along with a good quality power that is mostly important is a proper ‘load forecasting. It basically helps them to make important decisions regarding decisions on purchasing and generation of electric power, infrastructure development, and load switching/pooling. Importantly, it is extremely important for energy suppliers, financial institutions, and other participants in electric energy generation, transmission, distribution players, and market condition.
Load forecasts can be further characterised into three different categories: short-term forecasting which usually varies from one hour to one week, medium-term forecasting which usually varies from a week to a year, and the long-term forecasting which are designed by considering more than a year time-period. Moreover, the load forecasting for different time horizons are also very important for different operations within a utility organisation. The basic nature of these forecasting are very different as well. For example, for a particular area, it may be possible to predict the very next day load with an accuracy of approximately 1-3%. However, it is just impossible to predict the next year peak power load with the same magnitude of accuracy since accurate long-term weather forecasts are not available till now. For the next year peak load forecast, it might be possible to provide the probability distribution of the load on the basis of historical weather observations.
Load forecasting has always been a very important factor for taking a planning and operational decision by a utility company. However, with the deregulation of the energy industries, it has become a very significant factor. With the variation in demand and supply, frequent changing of weather conditions and increasing of energy prices  by a factor of ten or more during peak-load situations, it has become a vitally important consideration factor for utility organisation. Short-term load forecasting helps us to estimate the magnitude of load and to make a futuristic decision that can prevent overloading. Timely implementation of such decision results into the improvement of network reliability and reduction of occurrences of equipment failures and blackouts. Moreover, Load forecasting is also very important factor for contract evaluations and evaluations of various sophisticated financial products on energy pricing being offered and supplied by the market forces. Decisions on capital expenditures based on long-term forecasting are also an important consideration factor in a non-deregulated economy when increase in rate could be justified by the capital expenditure incurred on it.
Most forecasting methods use different statistical techniques or artificial intelligence algorithms such as neural networks, regression, fuzzy logic, etc. For the said purpose. For medium- and long-term forecasting, generally two of the methods; so-called end-use and econometric approach are used. As we know, a large variety of mathematical tools and ideas are being extensively implemented for load forecasting. But with the further development and improvements of appropriate mathematical tools will lead to the development of a more precise, absolute and accurate load forecasting techniques. Moreover, the accuracy of load forecasting does not only depends on the load forecasting techniques, but also depends on the forecasted weather scenario accuracy.

                                                                                  II. Important Factors being considered for load forecasting

For short-term load forecasting several factors, such as time factors, weather data, and possible target customers’ classes should be considered predominantly. The medium- and long-term forecasting takes into account of a wide range of factors namely, the historical load and weather data, the number of  targeted customers in different categories, the electrical appliances being used in the area and their characteristics including age, the demographic and economic  data and their forecasts, etc.
The time factors taken into consideration include the time of the year, the day of the week, and the hour of the day. Most important factor that we have to take in consideration is that, there are important differences in load between weekends and weekday. The load on different weekdays can also sometimes behave very differently. For example, Fridays and Mondays as being adjacent to weekends, may have structurally a very different loads in comparison to Tuesday through Thursday. This is particularly very true during the summer time. Moreover, Holidays are more difficult to be forecasted than non-holidays because of their relative unfrequented occurrences of event.
Weather conditions also influence the power-load. In fact, forecasted weather parameters are the most important factors in short-term load forecasts. Various weather variables such as temperature and humidity could also be considered for load forecasting.
Most electric utilities provide service to customers of various types such as residential, commercial, and industrial. The electric-load pattern is significantly different for customers that belong to different classes but is somewhat alike for customers within a class. Therefore, most utility company distinguishes load behaviour on a class-to-class basis [1].

                                                                                                                                         III. Forecasting Methods

Over the last few decades a number of forecasting methods have came into picture or been developed. Two of the methods, so-called end-use and econometric approach are broadly used for medium- and long-term forecasting. A variety of methods, which include the so-called similar day approach, various regression models, neural networks, time series expert systems, statistical learning algorithms and fuzzy logic, are used for short-term load forecasting. . But with the further development and improvements of appropriate mathematical tools will lead to the development of a more precise, absolute and accurate load forecasting techniques. Statistical techniques usually require a more advanced mathematical model that represents load as a function of different factors namely; time, weather, and the targeted customer class. The two main categories of such mathematical models are: multiplicative models and additive models. It only differs with each other as whether the forecast load is the product (multiplicative) of a number of factors or  is the sum (additive) of a number of components. For example, Chen et al. [2] presented an additive model that takes the form of load prediction as the function of four components:
L = Ln + Lw + Ls + Lr,
where L is the total load, Ln represents the “normal” load, Lw represents the weather sensitive part of the load, Ls is a special event component that create a substantial deviation from the usual pattern of load, and Lr is a completely random term, may be any harmonic.
Chen et al. [2] also suggested electricity pricing as an additional term that can be included in the said model. Naturally, electricity consumptions are also affected by price decrease/increase. Large cost sensitive industrial and institutional loads can have a very greater impact on loads.
A multiplicative model may be of the form
L = Ln • Fw • Fs • Fr
where Ln is the normal load and the correction factors Fw, Fs, and Fr are some positive integers that can increase or decrease the overall power-load. These corrections are further entirely based on weather factor (Fw), special events factor (Fs), and the random fluctuation factor (Fr). Factors such as load growth (Fg) and electricity pricing (Fp) can also be included into it [3].

III.I. Medium and long term load forecasting methods

The econometric modelling, end-use modelling, and their combinations are often mostly used methods for medium- and long-term load forecasting. Descriptions of electrical appliances used by customers, the sizes of their houses, ageing of equipment, technology advancement, customer behaviour, and dynamics of population in a particular region are usually included in the statistical and simulation models entirely based on the so-called end-use approach. In addition, predominant economic factors such as employment levels, per capita incomes, and electricity prices are included or being considered significantly in econometric models. Most often these models are used in combination with the end-use approach model.
                Long-term forecasting mainly includes the forecasting based on the population changes, economic development, commercial construction, and the technology advancement. The end-use approach used for it directly estimates energy consumption over a period of time by using extensive information on end use and end users, such as number of electrical appliances, the frequency of their use, its age, sizes of houses, and so on.
Statistical information along with dynamics of change of consumption by customers is the basis for these types of forecasting.
Moreover, End-use models focus mainly on the diverse uses of electricity in the residential, commercial, and industrial sector. It is entirely based on the principle that electricity demand is mainly because of customer’s demand for lightening, heating, cooling, refrigeration, etc. Thus the end-use model primarily explains ‘energy demand’ as a function of the number of electrical appliances available in the market [4].
Ideally this approach is very absolute as well as accurate. However, it is very sensitive to the magnitude and quality of end-use data provided to it. For example, in this method equipment age distribution factor is also a very important factor for particular types of electrical appliances. End-use forecasting need less historical data but require more information regarding customers and their electrical-equipment.

                                                                                                                                            IV.Econometric models

                The econometric technique approach model combines economic theory along with statistical techniques for forecasting of electricity demand. The approach basically predicts the relationship between energy consumption factors (dependent variables) and the consumption influencing factors. The said relationships are predicted by the method called as the least-squares method or time series methods.
One of the options in these type of framework is to simply aggregate the finding done by econometric approach, when consumption in different sectors (residential, commercial, industrial, etc.) is calculated as the function of weather, economic and other variable factors, and then prediction are being assembled using recent historical data.
Moreover, Integration of the econometric approach with the end-use approach introduces a much required behavioural components into the end-use equations.

                                                                                                         V.Statistical model-based learning Approach

The end-use models and the econometric model approach basically require a large magnitude of information regarding electrical-appliances, customer’s behaviour, economics, etc.  Therefore, their application is quite complicated and requires a much human participation. In addition such data is also often not easily available regarding a particular set of customers and their utility behaviour.  Moreover, this problem arises more significantly if the utility organisation wants to conduct a next-year forecasting for a sub-area, which are often referred as load pockets. In such case, the amount of the work (should be performed) increases in a direct proportion with the frequency of load pockets. In addition, the finding by end-use approach model and econometric approach model for different load pockets are also very different from each-other.
In order to reduce the complexions of the medium-term forecasting, and making them more accurate and absolute, a new model is developed by Feinberg et al.([5], [6]). It is basically a statistical model that learns the different parameters of load model from the historical data.
L(t) = F(d(t), h(t)) • f(w(t)) + R(t)
where L(t) is the real or actual load at a particular time t, d(t) is the days of the week, h(t) is the hours of the day, F(d, h) is the daily and hourly component factor, w(t) is the weather data factor that also includes the temperature and humidity, f(w) is referred as the weather factor, and R(t) is any random error.
In fact, w(t) is a vector quantity that mainly consists of the current as well as lagged weather variables. It reflects the fact that electric load does not only depends on the current weather conditions but also on the weather behaviour of previous hours and days. It is because of the fact that in summer season the use of air conditioners increases when the hot weather continues for several days.
1.PNG
Figure 12.1 presents an example of a scatter plot that compares the model and real parameters.
2.PNG
Figure 12.2 demonstrates the convergence of the correlation between the actual load and the model for the iteration process.

 

                                                                                                VI.Importance of load forecasting in power system

Load forecasting in power system is basically a centralised and integral process in the operation as well as planning of any electrical utility organisation. it generally includes the absolute and accurate estimation of both the magnitudes and the geographical location of electrical load over a different period of time of the planning horizon. This is the reason because of which the importance of load forecasting is increasing significantly in a typical power system. Some of the important of them are:-
·         Helps to control the operation: - it helps to make the system more efficient by optimizing it. System should be operated only when it is required, and should produce the power in accordance with the demand only. This method further also reduces the wastage of different energy resources elements, which were being used without of getting any output.
·         Helps in planning: - with the help of load forecasting finding, utility company can plan their operation according to the perceived demand. If the prediction of demand is more than present, they can look of establishing a new unit or may look for arranging them from somewhere else to compensate the demand.
·         Helps in determination of Tariff: - in a current scenario, most utility company determine their tariff rate after the consideration of finding of load forecasting. Determination on the basis of sales forecast helps them to earn more profit or to increase the revenue.
·         Helps central grid to allocate power to different sectors judicially: - in the absence of a proper accurate load forecasting, there may be a scenario in which a sector is getting more power than adequate and there is a complete black-out in the other sector. This condition is not judicial. With the help of a proper load forecasting finding, the power can be allocated to different sectors judicially.
·         Limitation of pollution to an extent: - with the help of optimization of power system and a proper load forecasting finding, we can also help the environment by limiting to get it polluted up to a certain extent. This is because of the fact that we are producing that much power only, which is actually required. Surplus power production does not suffice any purpose neither to us nor to the environment; rather pollute it significantly.
·         Helps in taking a decision regarding dispatch of amount of power, unit commitment, fuel allocation to the unit and off-line network analysis.

                                                                                          VII. Limitations associated with the load forecasting

·         Whether factor: - no one really knows, what it will be in next few hours. This is the main reason because of which no forecasting in which ‘whether’ plays any role into it, is that much accurate.
·         Customer Behaviour: - customer behaviour also changes frequently and it is quite a Hercules task to predict the behaviour of a very large set of customers.
·         Government policies and Regulations: - The policies and regulations set by the government also cause a significant impact on the accuracy of load forecasting finding. For example: if the government make it mandatory to use only LED light for their public; naturally load occurring will be less as was forecasted earlier. 
·         Spontaneity of situation: - it also plays an important role. For example: in a power plant suddenly a grid failed so that the load of that grid have to be shifted to other grids, and this will result into high perceiving of load than expected.

                                                                                                                                                  VIII. Future Scope

In this paper we have discussed about several statistical and artificial intelligence approaches that have been implemented for short-term, medium-term, and long-term electric load forecasting. Several statistical models and algorithms that have been developed and implemented are quite structurally complex. The accuracy of the forecasting is also one of the area that could be further improved and developed
Researchers should also try to simplify the boundaries of applicability of the developed models and algorithms. So far, there is not a single model or algorithm which is full-proof. The main reason for that is, utility service vary significantly for diverse range of industrial, commercial, and residential customers. In addition to that, it also varies in geographic, climatologic, economic, and social characteristics.
Selecting and implementing the most compatible algorithm by a utility organisation can be done by testing the algorithms on real collected data of the customers.
As sated above, weather plays an important role to influence the load forecasting. The conventional approach to short-term load forecasting considers the forecasted weather scenario as an input. However, most important recently developed technique in weather forecasting is referred as ’so-called ensemble Approach’ which advocates of computing multiple forecasts as an input. After that probability weights can also be assigned to these ensembles. The main advantages of having a load forecasting in the probabilistic form is that:-
·         it can lead to a more accurate hourly forecast
·         The probabilistic description of the futuristic load can also be used as a significant finding to decision support systems to make important decision regarding generation, purchasing, and switching.

Conclusion

In a current scenario of a de-regulated market structure ‘Accurate load forecasting’ has become a very important factor for electric utility company in order to remain a significant player in the market. In this paper we analysed some statistical and artificial intelligence approaches that are being frequently used for electric load forecasting. We also discussed some of factors that affect the accuracy of the finding of forecast predominantly namely, as weather spontaneity, time factors, customer behaviour, as well as economical and end use factors.
Recently, advanced mathematical modelling is also being used for the said purpose. Further improvement in the accuracy of load forecasting can also be implemented by providing short-term electrical load forecasting in the form of probability distributions rather than in the forecasted numbers; for example: the’ so-called ensemble approach’ can also be used. We have also seen the significant impact of load forecasting on the performance of power system. It basically helps to optimize the power system in accordance with the demand of customer.

References

[1]     H.L. Willis. Spatial Electric Load Forecasting. Marcel Dekker, New York, 1996.


[2]     H. Chen, C.A. Canizares, and A. Singh. ANN-Based Short-Term Load Forecasting in Electricity Markets. Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference, 2:411–415, 2001.
[3]     S. Rahman. Formulation and Analysis of a Rule-Based Short-Term Load Forecasting Algorithm. Proceedings of the IEEE, 78:805–816, 1990.
[4]     C.W. Gellings. Demand Forecasting for Electric Utilities. The Fairmont Press, Lilburn, GA, 1996.
[5]     E.A. Feinberg, J.T. Hajagos, and D. Genethliou. Load Pocket Modeling. Proceedings of the 2nd IASTED International Conference:Power and Energy Systems, 50–54, Crete, 2002.
[6]     E.A. Feinberg, J.T. Hajagos, and D. Genethliou. Statistical Load Modeling. Proceedings of the 7th IASTED International Multi-Conference: Power and Energy Systems, 88–91, Palm Springs, CA, 2003.
[7]     J.W. Taylor and R. Buizza. Using Weather Ensemble Predictions in Electricity Demand Forecasting. International Journal of Forecasting, 19:57–70, 2003.
J.W. Taylor and R. Buizza. Neural Network Load Forecasting With Weather Ensemble Predictions. IEEE Transactions on Power Systems, 17:626–632, 200

Comments

Popular posts from this blog

HIGH VOLTAGE TEST TECHNIQUES - Research Paper

Abstract: In this paper we have dealt with the high voltages testing techniques and High voltage measurement techniques.Different techniques like Chubb-Fortescue Method and Peak value measurement are also explained in detail. The method of measurement of voltage with the help of Sphere Gap and Construction of Sphere Gap and its Effects of earthed objects and atmospheric conditions on the accuracy of measurement are explained in details.Other techniques like Principle of measurement of voltage by Electrostatic Voltmeters and its Construction of Electrostatic Voltmetres help in study of High Voltages. Principle of Potential Dividers And types of potential dividers circuit are also covered in this paper. High test voltages generated in laboratories require special techniques for their measurement. Each type of high voltage namely; ac (), dc (=) and impulse () can be suitably measured with more than one different techniques. The choice of the method of measurement in a laboratory is ...